AEDC Course!! This was the course which was the turning point in my life. Right from the entrance exam to the end of the course, everything was communicated in a very professional way, which set up a good foundation that can be applied practically. The best thing I liked about the course, was the fact that numerous industrial & professional examples, experiences and situations were shared by the faculties wich helped us immensely in understanding the concepts easily. This was an excellent experience. I learned a lot that will be of immediate use in my job. In fact, I've already been doing so, right from 10 days into my job. I would strongly recommend this course to everyone, as it takes you back from the basics to practical knowledge. Thanks to all the hard work put in to this by the whole team of ISHRAE, this course was a great success for me.

Mr. Anuj V.

M/s. Aravind Airconditioning Pvt Ltd., Bangalorea

"When I look back to this course conducted by the ISHRAE Institute of Excellence, I see how much it has changed me as a person. The course has been an opportunity of immense learning for me. The faculty were some of the best and brightest in the industry, who were more than willing to guide us throughout our journey. This, along with the industrial training experience, which offered as a part of the curriculum gave a big boost to me in deciding the next step forward. This course not only made me more competent engineer but also developed me as an individual to take on problems and challenges in the right spirit. I sincerely thank the team for their efforts put into the course, especially Mr. Prasanna who played an instrumental role in the design of structure and content of the course as well as Mr. Pugaz who was there to assist us whenever we needed his help."

Mr. Mayank Tulsiani

M/s.Airmech Engineers Pvt Ltd., Bangalore.

The Entrance exam was a basic exam mainly testing the ability of an engineering student and was conducted fairly. The faculty who came were very close to the students understanding them and making them understand HVAC System. They were the best part of the programme. The training given in my company ETA Engineering was very good mainly focusing in execution of the project, handling pressure maininting quality standards. ISHRAE gave me an opportunity to work in HVAC through the job junction last year and this year it gave me more knowledge than I imagined. It is a great experience in ISHRAE. The final exam was the grand finale which was a lengthy exam wih all calculation which had sometime constraint other than that it was a good exam.

Mr. Sudhangan

M/s. ETA Engineering Pvt Ltd., Bangalore

AEDC Course!! This was the course which was the turning point in my life. Right from the entrance exam to the end of the course, everything was communicated in a very professional way, which set up a good foundation that can be applied practically. The best thing I liked about the course, was the fact that numerous industrial & professional examples, experiences and situations were shared by the faculties wich helped us immensely in understanding the concepts easily. This was an excellent experience. I learned a lot that will be of immediate use in my job. In fact, I've already been doing so, right from 10 days into my job. I would strongly recommend this course to everyone, as it takes you back from the basics to practical knowledge. Thanks to all the hard work put in to this by the whole team of ISHRAE, this course was a great success for me.

Mr. Gowtham

I am basically a electrical engineer and I had no idea regarding HVAC. When I joined the training programme I thought I would not be able to cope up with the rest of the delegates. The faculty were so helpful in making me understand even the smallest details. The study material was prepared in such a way that the contents would easily be understood. Industrial training was top notch because to read it and to actually see their working is quite a different feel. The faculty helped us in the field by relating the contents that we studied. In the end, I finally have to say that ISHRAE has provided a great opportunity in making me completely understand about HVAC. I would definitely recommend others to take up this training under the top class faculties.

Mr. Nikhil

M/s. Central Manufacturing Technology Institute (CMTI), Bangalore

Firstly, i would like to thank the Management ISHRAE Bangalore Chapter for providing such platform of AEDC Course for freshers and working engineers; and my company for nominating me for the 4 months training program. Special thanks to my Director Mr. Sivadas. Entrance test was conducted fairly. Honestly, we were glad to have such knowledgeable faculties who had vast experience of 30-40 yrs in HVAC & R industry. Infrastructure provided by ISHRAE was fairly good and pleasant for students for easier learning; nice ambiance. We were taken to sites for visits and practically things were explained by faculty. On 4th month internship at your company was provided. we were sent to different departments like, Design, project, planning and commissioning for training. Apart from training, after completion of every module assessment were conducted followed by final exam. Finally, i would like to say is that all who are willing to work or already been working in HVAC &R industry must under go this training.

Mr. Sukhiraj

M/s. Suraj Mani Engineers Pvt Ltd.,

Thanks for opportunity to share regarding ishrae AEDC Training. Before joining the AEDC, lots of doubts with me related to HVAC. After completion, i got lot of confidence on subjects same time practical knowledge is also improved. Learned lot of thing on design, heat load calculation from the basic. etc For AEDC, Entrance test was conducted fairly in very good manner. Ishare atmosphere is excellent place for learning. i am personally very happy with ISHRAE AEDC at Bangalore. I enjoyed with knowledge during AEDC. Great Atmosphere.
After AEDC, at my company
* Working more confidently * Enable to understand the whole project Process * Responsibility and focus on my job Increases

Mr. Anil Kumar

M/s. Shilpakruti Marketing Pvt Ltd., Bangalore

As I feel during the course, here are some of those ISHRAE Atmosphere was very good. All the faculty were well experienced and they share important and helpful case studies with me which are really occurs in practical aspect. They told us about the new upcoming technologies which are interesting. During my training I feel a boost up confident while working on the projects and I was more clear about the equipment working and their principles. After completing this course I am more answerable to the questions that arise during my work. After this course I am fully confident about my design

Mr. Deepak Kumar

M/s. Industrial Project & Products Co. (IP&PC) Gurgaon Rural, Haryana.

I am really enjoyed classes and classroom and course entirely good and classes taken by staff make the course to next level Industrial visit arranged really useful to relate with the topics and care taken by staffs was good and they cared us throughout course .Then about my training for me in Climatics where i learnt lot of things in field aspects and l am really lucky i placed there where i can built my carrier strong . I am really thankful to ISHARE and AEDC

Mr. Venkatesh

M/s. CLIMATICS, Bangalore

With reference to the trailing mail, kindly note my experience regarding AEDC course as follows. Entrance exam for admission to this course was worth mentioning as it covered important topics of our engineering curriculum. There was no need to put the same material in the form of hard copy what was given as soft copy to us, instead books should have contained something extra which was not there in the slides. Ishrae was very pro-active in conducting exams after each module but not at all efficient in declaring the results in time which holds true in case of final exam also. There was no need of one open book and one closed book format, one exam would have been sufficient. So far as classroom environment is concerned, always the temperature inside the room was maintained above desired level due to defective cooling system, care should be taken regarding that. Most of the faculty who taught us were full of professionalism with a mixture of interractive sessions and doubt clearing sessions with the delegates. Work load in company was too much so could not undergo any industrial training in company. As a whole, it was a good learning experience with Ishrae.

Mr. Anurag Sarkar

M/s. Sterling & Wilson Pvt Ltd. Bangalore

The course offered by ISHRAE was fantastic and is the best platform to start off for all those who would like to take their carrier in the field of HVAC engineering.Within the span of five months the learning modules covered all the basic fundamentals which is accompanied by site visits made the process of learning a different learning experience unlike the knowledge we are obtaining from only textbooks.The modules are thoroughly prepared by an expert and are taught by working professionals in the industry which made this course even more special.In short this course is one of the best one can get !.

Mr. Vishnu Ramachandran

M/s. Climaveneta Climate Technologies Pvt. Ltd., Bangalore.

The course was totally a comprehensive package of complete RAC. The most important thing about yhe course was, is designed to be easy and flexible in learning and understanding along with the site visits. It helped me a lot in learning and clarifying my doubts about some topics and getting the depth of HVAC. The only thing I didn't found good was site training, which actually should be of a month and all delegates should be given training at same site by the professionals. At last I would like to say that this course is very helpful for those who wants to be a good HVAC engineer with proper knowledge and skills.

Mr. Shashank Shekar

M/s. ETA Engineering Pvt Ltd., Bangalore

The Course was really helpful. After the course I was able to grasp the things and understand most of the parameters included in hvac. The course has increased the answering capability. It has developed the interest towards work. The faculties were also very good. Made us understand the concept in easy words. Time provided for some of the topics was less, should have extended. Site visits were very helpfull. It helped to corelate the theory with the field. Site visits must be planned frequently, so that we cannot forget the tehory before we reach the site. As far as the training program is concerned it was good. It can be improved. Some softwares can be included while teaching. Overall a very good package of knowledge for the freshers entering the field. Thank you all who have been the part of this program and providing such a platform for the freshers and all the best for the further training programs.

Mr. Mohd. Ghufran

M/s. SNEHA Enterprises, Bangalore

First and Foremost, I would like to thank ISHRAE Institute of Excellence and ISHRAE for giving me this wonderful opportunity.. AEDC Course of 3 months theoretical part completely covers HVAC &R from Design till installation. This gives me a wide knowledge and makes me confident to design the complete system Class Rooms, Learning environment are good and the faculties allotted for every topics are the Subject Matter Experts who thought with real examples and industry practices Site Visits arranged by ISHRAE Institute of Excellence was good Assessment of each and every module are well framed which makes me to apply the complete topics while writing the assessment Thanks to IIE and ISHRAE!!!!

Mr. Mohamed Faizal

M/s. ETA Engineering Pvt Ltd., Bangalore

friendly atmosphere and lovely staff, Helpful with questions, concept good teaching materials. The course was really interesting and informative. I feel it has given me enough to explore my design and has also made me a lot more curious about experimenting with material and forms. I would have preferred to have a bit more time here and would definitely love to return to the institute again and learn more. It was a bit complicated in the beginning but I did understand eventually. But most of all I loved learning all this from people who know so much about all of this and I liked the case study the most with all the discussions and exchanges. This training program has helped me a lot and also taught me more about HVAC&R and its various uses. Materially as well as spiritually. Thank you. I learned a lot, looking forward to be back for other courses. Learning to the maximum

Mr. Manoj Kumar R.S.

Its been months after we completed our course and i am happy to inform you that i gained more knowledge in HVAC field compared to what i am before having this course. Each and every work what i am doing is with complete understanding. ISHRAE Atmosphere also very good. All the test are conducted fairly and superbly. Question pattern also very good. I am feeling proud to say each and every faculties in ISHRAE course are more than superb. I am very much inspired by the way the faculties are teaching to us. About internship training i think we need more site walk through compared to this time we had. So that we can have 100% practical knowledge of how each and every items are. Even though we had slight problems in the middle of the course, every problem has been discussed and solved and i am expecting whatever the suggestion raised by us during the course will be solved by ISHRAE in the upcoming course.

Mr. Selva Kumar G.

M/s. AIRMECH ENGINEERS PVT LTD.,Bangalore

This course gave me the best experts in the industry to interact with, their guidance was the best that i had ever had. Its because of these experts that i gained quite a lot of knowledge on the field of HVAC. Their knowledge, and also their industrial expertise helped me grow my knowledge and as well as my personality. Thank you ISHRAE for providing an opportunity to interact with such kind of people.

Mr. Samir Gautam

M/s. ABS Aircon Engineers Pvt Ltd.,Bangalore